鼓风机出口压力控制系统设计.rar

  • 需要金币1000 个金币
  • 资料目录论文助手 > 高校设计 > 电气工程 >
  • 转换比率:金钱 X 10=金币数量, 例100元=1000金币
  • 论文格式:Word格式(*.doc)
  • 更新时间:2014-07-14
  • 论文字数:11313
  • 课题出处:(圈圈)提供原创资料
  • 资料包括:完整论文

支付并下载

摘要:本次设计主要解决鼓风机出口压力的控制问题,鼓风机是参数为30到200千帕或压缩比e为1.3到3的风机。主要通过PLC控制器对静叶角度的调节以及风机的转速调节来控制鼓风机出口的压力。静叶的控制是鼓风机控制的关键部分,伺服控制器接收来自PLC控制器的指令信号,然后和来自角位移传感器的角度信号进行比较,所得差值经过PID运算处理,处理的结果放大之后产生一个可以驱动电液伺服阀的指令电信号,伺服阀控制动力油,控制伺服油缸使得阀门达到预期的位置,实现调节静叶角度的目的;电机调速控制也是鼓风机控制的重要组成部分,变频器接收来自PLC的指令信号,变频器以达到改变出口压力的目的。因此性能优良的出口压力控制系统是保证鼓风机正常运行的前提保证。

关键词 鼓风机;出口压力;静叶角度;电机调速

 

Abstract:The design is mainly to solve the control problem of the blower outlet pressure, the blower is a parameter of 30-200 kPa or compression ratio e is 1.3 to 3 fan. Mainly through the PLC controller vane angle adjustment and the motor speed to achieve the blower outlet pressure control. The control vane blower control is a critical part of the servo controller receives a command signal from the PLC controller, then, and the angle from the angular displacement sensor signal is compared, the difference obtained after the PID operation processing, the processing result of amplification to produce a can drive servo valve command signal, the servo valve control power oil, makes the valve control servo cylinder to achieve the desired position, to achieve the purpose of adjusting the angle vanes; blower motor speed control is also an important part of controlling the inverter receives a command signal from the PLC, frequency converter in order to change the outlet pressure purposes. So excellent outlet pressure control system is to ensure the normal operation of the premise that the blower.

Keywords   blower  outlet pressure   stator blade angle   motor speed


支付并下载

提示:本站支持手机(IOS,Android)下载论文,如果手机下载不知道存哪或打不开,可以用电脑下载,不会重复扣费